Nose Pad Removal

Nose Pad Removal

In this section, we’ll briefly discuss how to remove the nose pad. This will be useful if the one included just doesn’t fit comfortably on your face.

WARNING: It’s very easy to mis-place the Nose pad separator tool. It is a small rounded square object that is typically placed between one of the arms and the glasses when you open it. Don’t do what I did and lose it.

Step 1: Remove the nose pad

Video: See how

Take the nose pad separator tool and slide it in between the top of the metal nose pad frame and the glasses. When you push in, the nose pad should release.

Use the Nose pad separator between the nose pad and the glasses to pop it out of place

Step 2: Insert Replacement Nose Pad

If needed, gently pull down to remove the current nose pad. To insert a different pad, take one of the (3) included Nose Pads (Small, Med & Large) and push it up into the frame in the same orientation shown below.

Insert one of the (3) nose pads you want to try

Step 3: Final Adjustments

You can make additional adjustments such as slightly bending the nose pad as well as moving the two over-the-ear support arms up/down in 3 different positions (you’ll hear a clicking sound). Warning: don’t apply too much pressure or you could damage the glasses.

https://wagnerstechtalk.com/